Genesis-2

Genesis-2 is an ultra low profile communications headset, designed to allow use without head protection, or in conjunction with most types of protective headgear, particularly motorcycle helmets, or those with close fitting to the skull.

In its standard form, it provides a single miniature earpiece transducer, providing wide dynamic range and a high receive audio quality, combined with a pressure gradient microphone transducer fitted to a flexible and extended boom, particularly effective when used with high performance motorcycle overt and covert radio installations.

As the main use of Genesis-2 headsets is to provide motorcycle riders with communications, it is usually supplied in a dual earpiece form along with customised Ear Moulds for maximum hearing protection and to allow radio reception at high speed.

Earphone

• Impedance: 32ohms
• Sensitivity: 105dB for 1mW +/-3dB@ 1KHz using IEC-318 coupler
• Nominal Power: 20mW, max power 50mW

Microphone

• Type: Pressure gradient electret
• Sensitivity: -57dB +/-4dB (re 1v/0.1Pa
• S/N Ratio: 35:1,
• Supply: 1.5 – 9v dc. 1d 0.5mA

Genesis-4

Genesis-4 headsets incorporate Ring and Spring securing mechanism to an in-ear mould to combine the robustness of Genesis-1 and the low profile of Genesis-2.

Available in Left ear or Right Ear, the Genesis-4 can be worn beneath all helmet types.

Genesis-4 Custom (Ring & Spring) Headset System (Non Filtered/Fully Occluding) – Approved to EN352-2:2002 Low profile, adjustable, noise cancelling motorcycle headset providing measured hearing protection to EN352-2:2002.

• Approved to EN352-2:2002
• SNR: 23dB
• HML: H=21dB; M=20dB; L=20dB
• Certificate Number: 2777/13788-02/E00-00
• Earmould Colour: Red or Clear as standard, other colours available on request (e.g. Blue or Yellow)

Optional Filtered

Genesis-4 Custom (Ring & Spring) Headset System (*Passive Acoustic Filter) *Note: Not currently approved with inclusion of passive acoustic filter as this reduces the earmould attenuation figures down from 23dB to approx 18-19dB

• Earmould Colour: Red or Clear as standard, other colours available on request e.g. Blue or Yellow

Genesis-5

Genesis 5 headsets incorporate Ring and Spring securing mechanism to an in-ear mould to combine the robustness of Genesis-1 and the low profile of Genesis-2.

The system incoporates a velcro strapped PTT.

Genesis-5 Custom (Ring & Spring) Headset System (Non Filtered/Fully Occluding) – Approved to EN352-2:2002 Low profile, adjustable, noise cancelling motorcycle headset providing measured hearing protection to EN352-2:2002.

• Approved to EN352-2:2002
• SNR: 23dB
• HML: H=21dB; M=20dB; L=20dB
• Certificate Number: 2777/13788-02/E00-00
• Earmould Colour: Red or Clear as standard, other colours available on request (e.g. Blue or Yellow)

Optional Filtered

Genesis-5 Custom (Ring & Spring) Headset System (*Passive Acoustic Filter) *Note: Not currently approved with inclusion of passive acoustic filter as this reduces the earmould attenuation figures down from 23dB to approx 18-19dB.

• Earmould Colour: Red or Clear as standard, other colours available on request e.g. Blue or Yellow